Electronic Alarms and Home Security Devices - GE Concord 4 Siren Installation
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : GE Concord 4 Siren Installation
Nj70000
01-25-09, 11:20 AM
I just installed a GE Concord 4 wireless system. I also bought a siren to be hardwired into the panel. The siren is a hardwire interior Siren and Piezo (60-278). It has 2 sirens with 2 wires total coming out of them and another wiren with 2 more wires. It also has 4 screw type contacts inside the siren. The instructions are really unclear, and I'm not sure how to wire this into my panel. Suggestions would be great! Thanks!
MrRonFL
01-25-09, 07:44 PM
The Concord 4 install instruction specifically say to only use the connections for the larger of the two speakers. The smaller one isn't used in this application.
MrRonFL
01-25-09, 08:01 PM
Hmmm, on second re-read. If the unit you have is a 12v siren/piezo combo (whose instructions are _not_ on GE's own website....), your correct connection would be for the piezo to go to output 2 and +12v. The main siren connects to output 1 and ground.