Electronic Alarms and Home Security Devices - RFK5501 Function Key Programming

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : RFK5501 Function Key Programming

andy12472
01-23-09, 10:43 AM
Programmed the function keys to default.. [1][03] Stay Arm, [2][04] Away Arm, [3][06] Chime on/off, [4][14] Command Ountput 1?, and [5][16] Quick Exit. Programmed the wireless keyfob to default too according to its instructions so stay and away function keys are the same between the keypad and the wireless key. Yet whenever I set the allarm in stay mode the LCD screen after arming shows the house icon empty and the PIR's trigger the alarm. I have the PIR's set as an interior zone [04]. Any ideas on how to get the system to function as it should in stay mode? :alarm:

MrRonFL
01-23-09, 06:38 PM
Change the zone type on the motions to 05 (interior stay/away).