Outdoor Power Equipment and Small Engines - Briggs 3.75hp Carb. Springs?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Briggs 3.75hp Carb. Springs?

dgcars
01-20-09, 01:27 PM
I have a 3.75hp Briggs Model#98902-2247-B1. When I got the mower, the springs where gone. I bought two new springs #691297 (governor), and #691859 (governor idle). I don't know where they are positioned. Tried every way I know, But no Luck. Has anyone got a picture or diagram? Need help! Looked all over the net, but no luck!!:wall:

AAWrench
01-20-09, 03:54 PM
Take a look at this and see if this is what you need

http://i275.photobucket.com/albums/jj317/kensmobile/sprint-link.jpg
geogrubb
01-20-09, 07:42 PM
AAWrench;
Excellent illustration, don't loose that pic, when spring gets here that same question is going to be asked a zillion times.(thats a bunch). Have a good one. Geo

AAWrench
01-20-09, 09:01 PM
AAWrench;
Excellent illustration, don't loose that pic, when spring gets here that same question is going to be asked a zillion times.(thats a bunch). Have a good one. Geo

Heck, I think I copied it from one of your old posts..:o
dgcars
01-21-09, 07:21 AM
AA Wrench, Thanks alot. The picture is what I was looking. I had the end on the air vane link right, but my bracket was bent, so that's why I could not get the other end of the spring in the correct position. Thanks again!:thumbup: