Electronic Alarms and Home Security Devices - vista 20p
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : vista 20p
fugitix
01-15-09, 04:11 AM
Hy i have a vista 20p sistem,a 6270 touch screen keypad and 3 ademco 5890pi sensor.i arm the sistem and on the keypad apear arm but the alarm does not sound.and every 10 minutes i hear loud sound.please help me.
PRO1 TECH
01-15-09, 05:19 AM
Hy i have a vista 20p sistem,a 6270 touch screen keypad and 3 ademco 5890pi sensor.i arm the sistem and on the keypad apear arm but the alarm does not sound.and every 10 minutes i hear loud sound.please help me.
where do you hear the sound coming from the keypad or the alarm horn
where do you hear the sound coming from the keypad or the alarm horn
fugitix
01-17-09, 12:24 PM
it is coming from the alarm
fugitix
01-17-09, 12:27 PM
it is coming from the alarm horn,but now i have another problem
after i finish programing in zone *56 i have the message ready trouble.and down near the date i have the message expansion mod failed,and if i go to the console mode i have the message check 100 rf receiver.and if i enter to the show zones between zone 99 and 101 i have the zone 100---rf receiver and after i have a hand and a question sign.tanks pro1 tech
after i finish programing in zone *56 i have the message ready trouble.and down near the date i have the message expansion mod failed,and if i go to the console mode i have the message check 100 rf receiver.and if i enter to the show zones between zone 99 and 101 i have the zone 100---rf receiver and after i have a hand and a question sign.tanks pro1 tech
MrRonFL
01-17-09, 03:29 PM
Ummm, do you actually _have_ a wireless receiver?
If you try to enroll wireless devices on a system without a receiver, you will get such an error.
Even though the system _can_ be programmed via that 6270, you actually _need_ to have at least 1 conventional keypad (you cannot use * + #, for example, with that 6270). That's Honeywell's specs, by the way. It's in the system manuals.
Your response is contradictory:
alarm does not sound.and every 10 minutes i hear loud sound.
Then
it is coming from the alarm horn
Many panels are configured to sound the siren if there is an expansion module trouble.
Honestly, your information is too fragmentary to even try to guess what you may have done. I am assuming this to be an attempt to set up a new system?
If you try to enroll wireless devices on a system without a receiver, you will get such an error.
Even though the system _can_ be programmed via that 6270, you actually _need_ to have at least 1 conventional keypad (you cannot use * + #, for example, with that 6270). That's Honeywell's specs, by the way. It's in the system manuals.
Your response is contradictory:
alarm does not sound.and every 10 minutes i hear loud sound.
Then
it is coming from the alarm horn
Many panels are configured to sound the siren if there is an expansion module trouble.
Honestly, your information is too fragmentary to even try to guess what you may have done. I am assuming this to be an attempt to set up a new system?
fugitix
01-17-09, 03:42 PM
but i have a wirless reciever is a 5881en hight security wirless reciver,and i can use * and #.
i put in the code 4112+800 and i go on *56 programing mode,and i doo exactli how is in the manual and after that i exit whit *99 and when the sistem starts i hear from the touch screen keypad a loud soud and says anel trouble,to clear trouble enter the code. and from the horn i hear that sound just for a second and after 10 min again.
yes is true this is the first sistem wich i try to mount,and i order from dowityourself.com and they give mee all the sistem.please help me.tanks.
i put in the code 4112+800 and i go on *56 programing mode,and i doo exactli how is in the manual and after that i exit whit *99 and when the sistem starts i hear from the touch screen keypad a loud soud and says anel trouble,to clear trouble enter the code. and from the horn i hear that sound just for a second and after 10 min again.
yes is true this is the first sistem wich i try to mount,and i order from dowityourself.com and they give mee all the sistem.please help me.tanks.