Carpentry and Woodworking - Hanging Mini-Baseball Bats
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Hanging Mini-Baseball Bats
Ernando22
01-11-09, 02:48 PM
I am trying to hang two 18 inch Mini Baseball bats. THey are going to be at about a 45 degree angle pointing to each other on a vertical wall. Does anyone have any suggestions as to how i can do this and what material i would need to complete this project? Thanks.
- one more thing i would not like to damage the bats in any way
- one more thing i would not like to damage the bats in any way
Speedwrench
01-11-09, 03:23 PM
do you want the hangers visable or invisable?
if invisable drill a couple of small holes on each bat then use finishing nails in the wall extending out about 3/8 in to support each bat. if you drill at a slight angle they should not fall off. you could also glue the nails into the bats and gently press them into the wall where needed.
if we're not supposed to eat animals why are they made out of meat?
if invisable drill a couple of small holes on each bat then use finishing nails in the wall extending out about 3/8 in to support each bat. if you drill at a slight angle they should not fall off. you could also glue the nails into the bats and gently press them into the wall where needed.
if we're not supposed to eat animals why are they made out of meat?
Gunguy45
01-11-09, 03:29 PM
If they will be hung on drywall, just drive the finish nails into the bats, clip off the heads and push them in as suggested prior.