Doors and Windows - builders' paper at windows and doors

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
suobs
01-03-09, 05:15 AM
I'm framing in a pole-barn carport with plywood sheathing (T1-11) with no separate siding over it. My question is how to finish the builders' paper (30# felt) at windows and doors. I'm thinking that it should wrap in from the framing at the rough openings and be stapled down to the studs/headers/sills, then the siding goes over it, then the openings are cut out, then the windows/prehung doors go in. Do I have this right?

chandler
01-03-09, 04:55 PM
Yep, I have to waste 15 characters, to make the answer long enough.:coffee: