Electronic Alarms and Home Security Devices - Vista 20 & 3 keypads

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Vista 20 & 3 keypads

ccabob
12-27-08, 09:38 AM
I installed a Vista 20 with 6160 and 6270 keypads. I cannot get my third keypad 6150 RF to work properly. I have addressed the 6160 as 16, the 6150RF as 17 and the 6270 as AUX 1. The 6150 back lighting lights up but will not allow me any control or show an arm or disarmed LED:wall::.
Any suggestions?
CCABOB

MrRonFL
12-27-08, 11:10 AM
Assuming tha you mean a Vist 20_P_, you have to activate address 17 in the system programming as well as setting the keypad address in the keypad itself.