Outdoor Power Equipment and Small Engines - Toro 824 auger belt replacement help

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
BBUDDD
12-27-08, 08:37 AM
Hello all,

I have a Toro 824, and I need to replace a worn, streched out auger belt. What steps do I need to perform to get at that pully. I have not worked on a snowthrower before, so all the help I can get is appreciated.

I know that I have to take off the auger and impeller, but not sure what bolts to remove, or procedures to be done.

Thanks.

indypower
12-27-08, 12:15 PM
You do not have to take off the impeller & auger. You just have to "split" the tractor half from the bucket (or scoop).
You do need a way to hold up the handle bars so they don't fall to the floor.
BBUDDD
12-27-08, 03:18 PM
that did the trick...4 bolts later and the belt is in place