Electronic Alarms and Home Security Devices - Reset Master Code?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Reset Master Code?

Garner65
12-23-08, 01:07 PM
I have an unmonitered Ademco Vista Se-10 alarm system. I tried to add another user code for my son, and now my code will not work. (I do not have the Master Code). But the new user code does work. How can I rest my user code? (Or the Master Code?)

MrRonFL
12-23-08, 06:05 PM
It sounds like you tried to add a user code and changed your master code to the one you were trying to change.

The correct sequence would have been [master code] + 8 + [user code number (3 - 6) + [new 4-digit code]

If you entered 2 for the user number, then you changed your master code.

Look on page 10 -11 of the user manual: http://www.alarmcommunity.com/manuals/ademco/N7229V2C.PDF
Garner65
12-23-08, 08:42 PM
Okay, is it possible to reset the master code from this new user code?

MrRonFL
12-24-08, 05:25 AM
Yes, on page 11 of the manual.
Garner65
12-24-08, 10:22 AM
I got the installer code, and reset the Master Code! Thanks for you help!

-CG