Electronic Alarms and Home Security Devices - safewatch pro 3000

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : safewatch pro 3000

jeskaj
12-09-08, 02:31 PM
keypad isn't working at all. i think the fuse to the battery pack needs replaced, but would that cause complete power failure? this system was just re-installed and think it may be a wiring issue. Since it is plugged in to an electrical outlet I would think that would be enough for the keypad display to work. Is it the wiring or the fuse? Thanks!

PRO1 TECH
12-09-08, 05:39 PM
keypad isn't working at all. i think the fuse to the battery pack needs replaced, but would that cause complete power failure? this system was just re-installed and think it may be a wiring issue. Since it is plugged in to an electrical outlet I would think that would be enough for the keypad display to work. Is it the wiring or the fuse? Thanks!

IF IT WAS ME LOOK OVER THE WIRING AND REPLACE THE FUSE ANY WAY AND IF YOU DON'T HAVE THE INSTALL MANUAL

http://www.guardianalarms.net/home_security_manuals/Ademco/Vista15P-20P_Installation_Manual.pdf

GO TO PAGE 16-7 FOR THE KEY PAD WIRING THE V 20P IS THE SAME PANEL FOR THE MOST PART
jeskaj
12-09-08, 09:36 PM
thank you! i'll check that out and see how it goes.