Electronic Alarms and Home Security Devices - Need to program Vista 15p without an Alpha Keypad

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
crhurd
12-08-08, 08:36 PM
I bought a Vista 15p off of Ebay... for whatever reason, I didn't think to make sure I got my hands on an Alpha Numeric keypad...

I have successfully installed all wiring (perimeter, smoke, PIR, glass break detector's ect)... And I just need to setup my zones, but am having trouble since I'm programming it "blind" without the Alpha Numeric keypad.

Can anyone that DOES have a correct KP, or tons of experience, walk me through button by button on how to setup the zones?

I have six zones... I can even post which zone types I want each zone if it will help.

Any assistance would be tremendously apreciated!

MrRonFL
12-08-08, 09:13 PM
The only way to do this "blind" is to follow the *56 instructions step-by-step. Period. Write down the steps, and follow them _carefully_

The following thread has an example:

http://forum.doityourself.com/electronic-alarms-home-security-devices/331175-ademco-6150-delete-default-rf-zone.html