Electronic Alarms and Home Security Devices - programming 5804 watch does not work

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
chumba
10-28-08, 08:25 PM
I am new and this is my first posting...I have an Ademco Lynx and I used the voice programming for all the sensors and the remote...all works well including the 5804 remote...I registered a 5804 watch remote, it was enrolled successfully but does not function even close to the control panel. I just need it for Arm and disarm...I have loop 3 for Arm and loop2 for disarm.
Does anyone have any ideas what I can do?
Thank you

85champs
10-28-08, 08:36 PM
Put in your master code then press 802 #4 and then the zone number you assinged it.
chumba
10-28-08, 08:54 PM
Hi 85champs....after I put in my master code, all the rest (802 #4 and zone #) is all beeps and nothing happens.
Thanks for your help anyways.