Electronic Alarms and Home Security Devices - Program Vista 10p with 6150rf

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Program Vista 10p with 6150rf

daniele98765
10-28-08, 09:11 AM
Hello,

I'm programing a vista panel with a 6150rf,
I can't get a 6160 to do the easier programing as it is on the manual.
I need to add nine 5890 PI, three 5816 and a wave 2 siren,
how can I do it and put to work my alarm system?????

MrRonFL
10-28-08, 11:16 AM
If you were wanting to install just one or two transmitters, I'd say you could do it by carefully following the steps in the *56 programming instructions.

For this many, _I_ wouldn't do it, and I know ademco-style programming pretty good.

You _need_ a 6160 or equivalent keypad.
daniele98765
10-28-08, 11:51 AM
Ok, thanks Ron for your quick answer,

I'll try to get one.