Electronic Alarms and Home Security Devices - Ademco 6160 time adjustment.

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Ademco 6160 time adjustment.

jthoburn
10-26-08, 09:36 AM
Hello,
I have an Ademco Vista 20p and I can't adjust the time with the 6160 keypad. I enter the time display fine but when I press the * key it backs me out. Any suggestions?

OldGrouchy
10-26-08, 09:54 AM
How are you accessing the time?
From your 20P manual:

Setting the Real-Time Clock
Set the time and date by doing the following:
1.(Security Code) +[#] + [6] [3]
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [∗]. To go back, press [#].
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [2] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or wait 10 seconds.
:)
jthoburn
10-26-08, 10:01 AM
Hey Grouchy,
Thanks for the reply. I'm entering the mode fine but when I press * it backs me out.