Electronic Alarms and Home Security Devices - DSC 1832 & PK5500 --- Stay function and panic button

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
Viperoptic
10-20-08, 04:22 AM
Hi all

I have just installed my first DSC system and it all went well, everything is working perfectly except for the panic button and my stay zones.

I think that I have missed some programming for the stay zones.

I have done the installer walkthrough and all the zones works

I have set all the attributes for "Stay and auto bypass" on stay command

This I did in

*8 - installer code
- 001
-set all zones to
01 = 03 – door mags
02 = 03 - PIR
03 = 05 - this is the zone that I want in stay mode
04 = 03 - PIR
05 = 03 - PIR
06 = 03 - PIR
07 = 05 - this is the zone that I want in stay mode
08 = 16 - This is my panic button

Nothing I try works I seem to be out of luck with the panic button and my stay zones….

Can anybody assist

Big thanks

mark

Viperoptic
10-20-08, 06:14 AM
Sorry to be a pain ... any ideas ? I am really stress :madhell: :-)
MrRonFL
10-20-08, 03:43 PM
Volunteer forum, not manned 24-7, complicated stuff waits til I have time.


Your question is kinda vague. What are these zones and buttons _not_ doing?

If the zones are bypassing when you arm the system, you have to open and close an entry-exit zone to keep the auto-bypass from kicking in.

If you want the panic key to be audible, you have to turn on option 2 in location 15.