Electronic Alarms and Home Security Devices - Radionics Commend Center D6116
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Radionics Commend Center D6116
edzay
10-04-08, 01:29 AM
I bought a house and came with Radionics Command Center D6116. I do not know the password.
Does anyone know a default password for this equipment.
Thank you
Does anyone know a default password for this equipment.
Thank you
MrRonFL
10-04-08, 07:55 AM
Radionic panels are _very_ difficult to work on. They are _not_ DIY friendly systems.
Could that model number be D6112? If so, then there is definitely nothing you can do with it as an end user. These were programmed using either a barcode programmer device and a book of bar codes, or with the download software. Both are difficult to lay hands on.
A keypad(s) and control replacement is probably your best route for this one.
Could that model number be D6112? If so, then there is definitely nothing you can do with it as an end user. These were programmed using either a barcode programmer device and a book of bar codes, or with the download software. Both are difficult to lay hands on.
A keypad(s) and control replacement is probably your best route for this one.