Entertainment Center: TVs, Stereos, VCRs and DVDs - Toshiba Projection TV Distorted Image
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Toshiba Projection TV Distorted Image
Blish
10-01-08, 06:30 PM
51 inch Toshiba Projection TV
The problem is the the image is good towards the center, but blurred towards both ends, with ghost images in red and blue.
The image also bows towards the center from the top and bottom center.
Any tips are appreciated!
The problem is the the image is good towards the center, but blurred towards both ends, with ghost images in red and blue.
The image also bows towards the center from the top and bottom center.
Any tips are appreciated!
HotinOKC
10-01-08, 06:32 PM
Welcome!
Sounds like your convergence board. Please post a model # so we can help you further.
Sounds like your convergence board. Please post a model # so we can help you further.
Blish
10-01-08, 07:01 PM
I believe this is the model number : 51H84
Thanks!
Thanks!
HotinOKC
10-01-08, 07:15 PM
Thanks.
Replacing the convergence IC's requires some desoldering and soldering, so if you are not comfortable with that, I would suggest getting a technician in to repace them. It will probably run you $250-300.
Convergence IC part # STK392-110 Usually requires two.
Replacing the convergence IC's requires some desoldering and soldering, so if you are not comfortable with that, I would suggest getting a technician in to repace them. It will probably run you $250-300.
Convergence IC part # STK392-110 Usually requires two.