Kitchen Large Electric Appliances - white wetinghouse washer model mw3445res0

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
geniusness
08-23-08, 01:40 PM
Washing machine was making squealing noise and smelled burned rubber. I have taken off the front panel. When I removed the agitator I found massive gunk and am now trying to get the inner tub out so that I can clean it. I've removed the 5 screws (?) that hold the tub down and the outer ring but cannot get the tub out. Is there a screw I've missed. Can I hammer a flat edged screwdriver between the tub and the agitator assembly thingie to loosen it?

Any help or suggestions are appreciated

geniusness
08-23-08, 01:43 PM
Washing machine was making squealing noise and smelled burned rubber. I have taken off the front panel. When I removed the agitator I found massive gunk and am now trying to get the inner tub out so that I can clean it. I've removed the 5 screws (?) that hold the tub down and the outer ring but cannot get the tub out. Is there a screw I've missed. Can I hammer a flat edged screwdriver between the tub and the agitator assembly thingie to loosen it?

Any help or suggestions are appreciated

sorry model number is mws445res0
pugsl
08-23-08, 06:19 PM
Here is a link to your machine.
http://www.searspartsdirect.com/partsdirect/retrieveModelActionHome!retrieve.action;jsessionid=U3zXIpxHyVEyNNBmqASaaw**.shcapp3105?modelNumber=mws445res0&pop=flush
Tub should come out after you loosen the bolts. You have a Frigidaire Washer. transmissions usually the problem with these.