Toilets, Sinks, Showers, Tubs and Disposals - bath faucet connector extension

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : bath faucet connector extension

Gilzila
08-11-08, 06:38 PM
I am replacing my vanity in one of my bathrooms and I had to cut the copper pipes and place compression valves for the sink close to the floor to get the vantity installed. I think might need a connector hose longer than 30 inches....do they make them longer than 30 inches? If not what are my options

Thank you

chandler
08-11-08, 07:46 PM
You should be able to find a 36" stainless steel braid line in 3/8 x 1/2 to fit the application. If not, you could always turn the piping upward and install a "through" stop valve and a shorter braid line.
plumbingods
08-11-08, 07:57 PM
They also sell 3/8" braided extension lines 12" long. You would hook that onto the shut off valve, then connect the 30" supplies to the extension lines and the faucet.

Gilzila
08-12-08, 08:48 AM
Where do they sell those extention lines....I been looking on line and having some difficulty finding it, thank so much for you reply
plumbingods
08-12-08, 03:50 PM
Any plumbing supply store should carry them as well as the big box stores. Some small hardware stores may also have them.