Electronic Alarms and Home Security Devices - Evolution EV-REC1 How to configure with DSC Panel?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
rurapente
08-11-08, 12:33 PM
HI,

I have a setup EV-REC1 receiver with 4 remotes. The receiver and the remotes are working 100%. And the receiver is currently connected to Zone 7.

Can someone please tell me what I need to do on a DSC Power 8 panel to get it to see/work/register/enrol this EV receiver so that it can work with it? I have my master codes and everything - except a manual to tell me what to do.

Thanks,

Dimitri

MrRonFL
08-11-08, 05:16 PM
This has more to do with the instructions for this wireless receiver, than for the DSC panel. If you are simply connecting to a zone input, then you will program the zone input for whatever function that the keyfob is intended to supply (arm/disarm/keyswitch or Panic, etc.)

The website for the maker of this third party device doesn't seem to make the installation manual for the wireless receiver available, so I have insufficient information to provide a meaningful answer.