Painting - Painting a fiberglass entry door
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Painting a fiberglass entry door
majac777
06-25-08, 09:00 AM
Hello,
To paint (not stain) a fiberglass entry door, do I need to use a primer first?
Many thanks,
Majac777
To paint (not stain) a fiberglass entry door, do I need to use a primer first?
Many thanks,
Majac777
Gunguy45
06-25-08, 09:05 AM
Majac,
It depends on the door. Many are pre-primed. Is this a smooth finish or woodgrain? What does the manufacturer recommend?
If in doubt, prime it out. It can't hurt and would be good insurance. Don't forget under the hinge leafs.
Mark was on earlier...wait and see what he says.
It depends on the door. Many are pre-primed. Is this a smooth finish or woodgrain? What does the manufacturer recommend?
If in doubt, prime it out. It can't hurt and would be good insurance. Don't forget under the hinge leafs.
Mark was on earlier...wait and see what he says.
marksr
06-25-08, 09:18 AM
I'm not sure if I've ever painted a fiberglass door but it shouldn't need any special primer. It would be a good idea to clean the door first [rinse well] to make sure there are no contamiments to hinder a good bond.
Go to your local paint store [not dept], they are usually qualified for good advice and their coatings will be superior to what you can get at a big box.
Go to your local paint store [not dept], they are usually qualified for good advice and their coatings will be superior to what you can get at a big box.