Painting - Sanding primer

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Sanding primer

n0c7
06-08-08, 09:37 PM
I used Sherwin Williams Quali-kote primer for my recent drywall project. There are a few spots that I dripped/splatted and a few smalls areas I need to touch up. Can I use 150-grit drywall sand paper to sand these areas down or is there something better recommended?

Just asking before I try and make a mess. :cool:

marksr
06-09-08, 05:22 AM
Yes you can sand them but depending on the drip, they don't always sand well. If this is the case, scrape off the offending spots, and cover with spackling or joint compound, sand and prime when dry.
n0c7
06-09-08, 09:21 AM
Sounds good, thanks.