All Trucks, Campers, Trailers, RV's and Motor Homes - Nissan Z24 question

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Nissan Z24 question

oldchevy4x4
05-24-08, 09:06 AM
Well, I pulled the z24 out of my truck and tore it down. While inspecting I found a discrepancy.... my Haynes manual says the main bearing journal should be no larger than 2.1636".... yet the journals on my crank are 2.3580 at the smallest. Block #'s.. Z24 126531
I was told when I bought the truck that it was not the original block, is there any way to tell by the numbers what this block is from or otherwise ID it so I can get the correct rebuild kit?

Thanks

ukrkoz
05-25-08, 07:59 AM
Well, I pulled the z24 out of my truck and tore it down. While inspecting I found a discrepancy.... my Haynes manual says the main bearing journal should be no larger than 2.1636".... yet the journals on my crank are 2.3580 at the smallest. Block #'s.. Z24 126531
I was told when I bought the truck that it was not the original block, is there any way to tell by the numbers what this block is from or otherwise ID it so I can get the correct rebuild kit?

Thanks

if i were you, i'd post in nissan forums. it's a fairly specialty questions, so you want to talk to the "dogs" direct.
besides, you want my opinion on haynes?? 'ts why i switched to chilton.