Electronic Alarms and Home Security Devices - aritech c350 sensor problem
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : aritech c350 sensor problem
stephen3
05-11-08, 12:24 PM
:wall: :wall: have an aritech c350 alarm but my son has cut the wires to the rear window sensor, i tried to inhibit it but it wont let me,can anyone tell me how to repair and reset the sensor?
stephen3
05-11-08, 12:30 PM
:wall: :wall: have an aritech c350 alarm but my son has cut the wires to the rear window sensor, i tried to inhibit it but it wont let me,can anyone tell me how to repair and reset the sensor?
MrRonFL
05-11-08, 01:13 PM
If there's any slack at all, simply strip the cut ends, twist them together, and put a crimp connector of some type on the splices.
If you don't have slack, use a small scrap of telephone wire to bridge the gap.
There's nothing to reset. Once you get the continuity fixed, as long as the contact isn't damaged, the zone will close; it's just a switch.
If you don't have slack, use a small scrap of telephone wire to bridge the gap.
There's nothing to reset. Once you get the continuity fixed, as long as the contact isn't damaged, the zone will close; it's just a switch.