Decks, Patios, Porches and Docks - Slightly uneven
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Slightly uneven
skinut2234
04-28-08, 05:58 PM
OK- got the posts and beams in for my side deck next to above ground pool. I'm guessing the pool is not 100% level.
When I test fit my 2 x 8 joists...... then look at where my decking will line up with the pool coping- it's a little off from one end of deck to the other (about 1/2 inch)... Is there anything I can do when securing the joists to make it so the height across the board when the decking is in is uniform?
When I test fit my 2 x 8 joists...... then look at where my decking will line up with the pool coping- it's a little off from one end of deck to the other (about 1/2 inch)... Is there anything I can do when securing the joists to make it so the height across the board when the decking is in is uniform?