Outdoor Power Equipment and Small Engines - briggs & stratton engine

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : briggs & stratton engine

septmus
04-07-08, 06:21 AM
model 193707

type 4025-01

code 90102310

I have the above, have put new rings on piston. But do-not know which postion to put the valve cam.
Can some kind person tell me which way it is.or point me to a wed site.
sep. fr

puey61
04-07-08, 07:21 AM
I'm not sure what you mean by valve cam so if it is the camshaft you are referring to then you must line up the two match marks - one on the crankshaft gear and one on the cam gear - in order to time the valve train correctly.
septmus
04-07-08, 07:29 AM
I'm not sure what you mean by valve cam so if it is the camshaft you are referring to then you must line up the two match marks - one on the crankshaft gear and one on the cam gear - in order to time the valve train correctly.


Thanking you
There is a small hole on the cam gear,is it the same on the crankshaft?

cheese
04-08-08, 12:25 AM
There should be a tiny dot on the camshaft gear tooth that lines up with the tiny line on the gear of the crankshaft.