Electronic Alarms and Home Security Devices - configure alarm

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : configure alarm

Fastmovn1
03-21-08, 06:44 AM
Hi,I have a question-I have a safe watch 3000EN and it is set up as follows..(wireless)4 sensors on ZT1 entry/Exit 2-ZT3 and 3-ZT4(PIR)I am looking to arm all sensors hot at night meaning instant alarm,If i set the alarm in the NIGHT-STAY mode the motions will instant sound...I have those enrolled in zone5.But my entry exit delay is still on,on the doors,Does anybody know how to set the alarm to instant alarm on all senors,Thanks

kcxj
03-21-08, 09:59 AM
You can arm the system in the instant mode by entering you code + 7. This will arm the system with no entry delay and bypass motion detectors.

This ADT panel will not arm in MAX mode (no entry delay and night-zones armed) ADT disabled this feature to prevent false alarms. Only way around this is a panel change.


Good luck
Fastmovn1
03-21-08, 04:54 PM
Well then adt sucks,yet another problem with them well if there is no way to set it with the motions then I will start to watch for the vista 20p board they are not that expensive..thanks for the answers I thought that is what i would get....