Fireplaces, Heating Stoves, Flues and Chimneys - bad pump?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : bad pump?

blauer
03-10-08, 03:34 PM
have a gas fireplace that hasn't been used in about 3-4 years. attempted to light....small blue flames appear then disappear every time i try to light it. could this be a pump that has gone bad?

Ed Imeduc
03-10-08, 04:14 PM
IS this Lp or Ng gas? Lines ok??? Regulators ok?? Do you mean the pilot??? If so try a new T/C on it.
blauer
03-10-08, 04:30 PM
NG, lines look fine, regulator...not sure, that's probably what i referred to as a pump. that's what i'm "guessing" is the problem. it appears to be ok, however. it has an electronic ignitor (no pilot)....

blauer
03-10-08, 07:45 PM
Also, what is a T/C?
clmom
12-16-08, 01:17 PM
Hi I have a whitfield profile 30 pellet stove that keeps turning itself off. I just replaced the control board last year and this started shortly after. I have to actually go and hit the button to turn it back on. Any advise on whats wrong with it? Thanks
logdoc_rob
12-16-08, 07:37 PM
Have you got a make and/or model number? That would help us assist you.
clmom
12-31-08, 11:57 AM
it is a lenox product whitfield profile 30-2 there were 2 different number under the lid. they were 60027304 rev.a and 60020191 rev.b