Electronic Alarms and Home Security Devices - Power Series PC1616

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Power Series PC1616

Andrew007
03-09-08, 10:45 PM
Thanks to all who have answered previous posts which have answered many questions that I had.

My question is this:
When I arm my system, the bypass light is automatically activated. I have not manually bypassed any zones. What is causing this ?

1 Partition
Z1 - Entry Delay
Z2 - Instant Alarm
Z3 - Entry Delay
Z4 - Interior Stay/Away
Z5-Z8 Not used

Thanks in advance.

tallcanadian
03-14-08, 10:02 AM
why dont' you try to reset your panel, then program from scratch. sounds like a programming issue.
MrRonFL
03-17-08, 10:10 AM
"It's not a bug, it's a feature"

That's the auto-bypass/Auto Stay feature. All modern systems do this.

If you don't open and close an entry/exit zone during the exit delay, the system automatically bypasses Stay/Away zones.

It's an anti-false alarm feature.