Electronic Alarms and Home Security Devices - ademco vista 10 programing

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : ademco vista 10 programing

np435
03-09-08, 02:50 PM
vista 10 with a 612716120 console how do i change the entry delay on one of my zones? my zone 6 has no delay

MrRonFL
03-17-08, 09:59 AM
The easy way is to physically move the zone wires and connect them to an existing zone that already has a delay, and just leave a dummy resistor on the original zone 6 input.

The better, but harder, method is to change the programming. Is this a Vista 10, Vista 10se, Vista 10p, or some other model?

There are programming differences between them.
np435
03-17-08, 08:52 PM
it says vista 10 in the box

PRO1 TECH
03-20-08, 07:16 PM
witch keypad do you have