Electronic Alarms and Home Security Devices - Expansion Mod Failed

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Expansion Mod Failed

cardinal
03-08-08, 10:58 PM
I replaced my 6150 with a 6270.
I am getting a "Expansion Mod Failed" message on the keypad.
What does it mean, and how can I fix it?

Many thanks

kcxj
03-10-08, 04:42 PM
Were you getting a check 09 message before? What panel do you have?
cardinal
03-10-08, 05:07 PM
No check 09 message.

I have a Ademco(ADP) v20p with a Ademco 6270 keypad.
The "Expansion Mod Failed" is showing up at the bottom of the security screen in the middle before the date/time. Alternating between message and what looks like a circuit board?

thanks

kcxj
03-10-08, 06:38 PM
Did you enable an AUI address for the touchscreen?
cardinal
03-11-08, 12:32 PM
Yes, It is working fine.
I think I set field 189=1 to enable aui.
I can go to console and enter programming, etc. Keypad seems to be working ok.
MrRonFL
03-17-08, 10:02 AM
Was that 6150 a 6150RF? If so, you removed your wireless receiver, thus the expansion trouble.