Kitchen Large Electric Appliances - Leaking Ice Maker

I have a Model CAN9 Ice Maker that develops two stalagtites (1 from each end) while making ice. It drips for a short while after dumping ice and re-filling with water. It appears to me that the ice maker is way out of level. The external sides of the refrigerator (GE top freezer) are very level. The inside wall where the ice maker is attached by two screws is nowhere near vertical on my level. I do not find any place to put my short 6" level on the unit, so I am going to have to try to level it as best I can by eye. Looking into the unit straight on, the right front corner is at least 1/4 inch below the right rear, but both slope toward the right side of the refrigerator. Has anyone had this problem? I am going to try to shim it level and hope that solves the leak.