Electronic Alarms and Home Security Devices - Ademco LynxR

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Ademco LynxR

kennyji
03-03-08, 05:10 PM
I have an Ademco LynxR monitored security system. I recently replaced the main backup battery in the unit as well as a battery in one of the wireless sensors. Everything worked fine! No error codes.

Now after about a week I will arm it as usual when I leave but when I return I open the door and there is no beeping or sound when it used to beep until I entered the code and push the "off" button.

Any Ideas???

Ken

MrRonFL
03-04-08, 06:53 PM
I would check your entry/exit door zones to make sure that they are actually working. If you don't open and close an entry/exit zone, the system will revert to stay arming, and this system doesn't make the audible warning in stay mode, only in away mode.