Kitchen Large Electric Appliances - kenmore electric ranger F1 problem
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : kenmore electric ranger F1 problem
crunch
03-02-08, 10:21 AM
hi all, I turned oven on to 400 , as it was preheating i heard a loud "pop" and the digital control was beeping and flashing F1.
I turned oven off and unplugged it. after 5 min i plugged it back in. now the digital control is woking OK but the oven and broil elements are not heating up at all. I notice that the light bulb is broken, and come to think of it the pop noise did kinda sound like bulbs popping.
So would that be causing the oven and broil elements not to work?
I turned oven off and unplugged it. after 5 min i plugged it back in. now the digital control is woking OK but the oven and broil elements are not heating up at all. I notice that the light bulb is broken, and come to think of it the pop noise did kinda sound like bulbs popping.
So would that be causing the oven and broil elements not to work?
Unclediezel
03-02-08, 05:06 PM
Is this a new installation ? or have you been using the range all along...(Well...until now..)?
Google ."Kenmore range F1 error."....
ERC board error...
Oven sensor...
Your specific problem will be better handled if YOU look up and find the specific situation, as we are not in your kitchen to witness this... There is plenty of good info out there
Google ."Kenmore range F1 error."....
ERC board error...
Oven sensor...
Your specific problem will be better handled if YOU look up and find the specific situation, as we are not in your kitchen to witness this... There is plenty of good info out there