Hardware and Fasteners - Micro Fasteners - UK
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Micro Fasteners - UK
erniethemilk
02-19-08, 04:05 PM
I'm looking for a micro screw which is I believe an M2.5 or even maybe an M3 thread size with a cross head screwdriver fitting.
Its unusual in as much as they are part threaded, with an unthreaded part under the head, the smaller screw is only 7.00mm overall length and has a head diameter of 3.27mm with a head thickness of 1.6mm
The larger part has a similar head detail, but is 9.7mm overall length. I can't find what DIN type screws these are at all.
I know its a long shot but would anyone any idea what type of screws these are.
Its unusual in as much as they are part threaded, with an unthreaded part under the head, the smaller screw is only 7.00mm overall length and has a head diameter of 3.27mm with a head thickness of 1.6mm
The larger part has a similar head detail, but is 9.7mm overall length. I can't find what DIN type screws these are at all.
I know its a long shot but would anyone any idea what type of screws these are.
George
02-26-08, 07:20 AM
I Googled "m2.5 screw" and came up with a boat load of web sites.
Best I can advise is to check these out (most will have pictures) to allow you to match up what you're looking for.
Best I can advise is to check these out (most will have pictures) to allow you to match up what you're looking for.