Outdoor Power Equipment and Small Engines - 5.5 hp snowblower wont move

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : 5.5 hp snowblower wont move

huntnfreek
02-09-08, 04:04 PM
i have a 5.5 hp craftsman snowthrower. when i pull the lever for the self propell it doesn't move at all in gear 1 and 2
in gear 3 it skips and jerks but will only move about 1 foot. if you help the wheels turn it will move again. the wheel do not free spin with no load on them. if you have any info that might help that would be great

smallengineguy
02-09-08, 05:34 PM
post model# and we can help.
hopkinsr2
02-09-08, 06:16 PM
You didn't give us any model numbers, but I'll take a guess at the machine. If it's a Muarry based unit, drain the fuel from the fuel tank & put the unit up on it's "nose". Remove the lower cover to expose the transmission. Find the friction wheel, the one with the black rubber around it & look at it close for flat spots or misssing pieces. Measure the O.D. It should be 3& 3/8 " new. If it's less than 3&3/16, it's worn out. If this isn't the type you have, Post the model & seriel # & the pros will get you dialed in in no time!!! Good Luck, Roger

indypower500
02-10-08, 07:15 PM
I agree with hopkins. Sounds like the friction wheel has a chunk broken out of it. The key being "it skips & jerks in 3rd gear".