Outdoor Power Equipment and Small Engines - Self propelled mower not staying engaged

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
gander
02-07-08, 02:13 PM
On a Craftsman self propelled-what keeps the front wheels locked in gear? I can push the lever ahead and the front wheels turn but the lever won;t stay forward. Should the lever go over center and stay locked in? It doesn'nt look like lever assembly can be taken apart.

smallengineguy
02-07-08, 03:22 PM
Post your model # so we know what we are talking about.
cheese
02-08-08, 12:31 AM
Yes, as long as you're holding down the safety/kill bail, the self-propel handle should push forward, over center, until it clicks in the engaged position. It should stay there until you release the safety bail. If it doesn't operate this way, you can replace the control assy, or you can open it up and see what went wrong inside. Chances are you'll need to replace it because of a broken plastic catch inside.

gander
02-08-08, 04:26 AM
Mower model # 917.377190 6.75 hp. engine. Says Eager-1 on it.
smallengineguy
02-08-08, 05:59 AM
The part you need is PN#184588 about $35
Called control cable assembly. I have a used one here if you want to PM me