Designing Kitchens and Bathrooms - HowTo: Gluing stainless stell together?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : HowTo: Gluing stainless stell together?
destruct05
01-29-08, 06:43 PM
Don't know if this topic fits into this forum....
I'm using partly stainless steel as a back-splash. I had some bad luck (dent) with one sheet that is already glued to the wall and want cover it up with a sheet on top of it.
What glue adhesive would work to hold stainless steel together? It is not a very large sheet.
I'm using partly stainless steel as a back-splash. I had some bad luck (dent) with one sheet that is already glued to the wall and want cover it up with a sheet on top of it.
What glue adhesive would work to hold stainless steel together? It is not a very large sheet.
HotinOKC
01-29-08, 07:13 PM
A standard construction adhesive should work fine...no?
destruct05
01-30-08, 06:23 PM
I have no experience doing it. I used several products in the past like LiquidNail products or recently the PowerGrab from
http://www.loctiteproducts.com/products/detail.asp?catid=45&subid=113&plid=482
Oftentimes the labels ask for one side to be porous....
http://www.loctiteproducts.com/products/detail.asp?catid=45&subid=113&plid=482
Oftentimes the labels ask for one side to be porous....