Gas and Oil Home Heating Furnaces - help with oil furnace

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : help with oil furnace

bigkeebouskie
01-28-08, 02:55 PM
I have a Bard fc085d36e furnace with a beckett afg burner
Around 2 months ago it shut of i hit the reset button and it fired right back up it has shut off again now it won't start back up. I have no exp. with furnaces all i know is that it has spark coming from the transformer and fuel any troubleshooting tips i can perform would be helpfull thanks

pflor
01-28-08, 07:45 PM
What Primary Control does the burner have?
If it is a Honeywell R7184P it may need to be reset by pressiing and holding the reset button for 30 secs until the LED flashes twice.
Grady
01-28-08, 07:45 PM
First & most importantly: If you have pressed the reset twice or more, had the motor run but the burner did not fire, STOP NOW & CALL A SERVICE PERSON. Be sure to tell the servicer how many times you've pressed the button. His/her safety & that of yourself, family, & home, depend upon an honest answer.

If you've only pressed the reset once or the burner motor did not run, post back & we will try to help.