Electronic Alarms and Home Security Devices - NX8 beeping is driving me nuts

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : NX8 beeping is driving me nuts

jkljkl
01-06-08, 08:39 AM
Caddx nx8 with carbon monoxide sensors beeps every 10 minutes. (double beep) Stops for about 8 hours with a test but then starts again. Battery tested and is good, no carbon monoxide detected by a separte unit. Keeps me up all night. Going to have to disconnect it.

MrRonFL
01-06-08, 11:34 AM
Not to be arch, but you have provided rather minimal information. Have you actually cracked the cover of your user manual?

Is this a system trouble, a zone activation, or have you even checked the *2 function to see what trouble is in the system? If your fire/monoxide zone tripped, did you enter the reset command?