Electronic Alarms and Home Security Devices - DSC 5010 832 Stay/Away Problem

Spent the last part of the holidays finishing hooking up my pc5010 832 that I installed when I built my house. After 2 days I finally got most of it working correctly with one small problem. If I [*+0] to leave it goes into zone bypass of my motion detector (which is set to [05] on zone 1) and the system sets as “Stay”. I’ve been using [*+0 *+1] to turn off the bypass when I set it and leave. Also my “Away” and “Exit” buttons on the keypad do not work. Don’t know if this is related. 015+3 and 4 are on. I know it’s something I overlooked somewhere but just can’t find it.
Any help please, Thanks
Jason

Think I found my answer posted by MrRon yesterday. I’ll have to try it when I get home.
Still need help on my Away and Exit button.

“05 is "interior stay/away" and will automatically bypass if you arm the system in stay mode, or if you arm the system and do not open and close an entry/exit zone (it will automatically jump to stay arming).”

That was the problem. I just needed to open the door after arming.
MrRon, nice link http://www.hometech.com/learn/rj31x.html. That'll help me tonight when I hook up the phone. Hope I can get it to call my cell.

Anyone know or know where I can find a complete list of attributes I need to change to get it to call my cell phone?

Got it. I was missing setting up a number in all my zones I was using under [320] [321] [322]. I have 24 zones and I only set up 1-8 in [320] for testing and was opening a window that used zone 12. There was no code set up to send on that zone so there was no need to dial out. Starting to get fun now:-) Now if i can only figure out why my Alternate Dial [303], Exit and Away are not working.