Heat Pumps and Electric Heating - Heat sequencer fried
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Heat sequencer fried
redlineret
12-20-07, 07:44 AM
Have an old 30+ years Williams Elect Furnace in which the Therm-O-Disc airflow style heat sequencer fried. There are lots of sequencers out there but this one is a 240V that controls two circuits. After numerous hours on the net and several visits to appliances parts stores the only one I have found that comes close is the Thermodisc 64T which is a style not a part number, and they only sell OEM lots.
http://www.tod.com/productdetail.asp?ProductID=9
I have two questions.
A) where might I find one of these 64T types. Do I need the exact temp rating to make heat?
B) Is it easy or possible to convert a three element to a 24V heater/240V ?
The current transformer is 240V 240V that my research indicates is used with two circuits.
Any help would be appreciated.
Thx Jan
http://www.tod.com/productdetail.asp?ProductID=9
I have two questions.
A) where might I find one of these 64T types. Do I need the exact temp rating to make heat?
B) Is it easy or possible to convert a three element to a 24V heater/240V ?
The current transformer is 240V 240V that my research indicates is used with two circuits.
Any help would be appreciated.
Thx Jan