Kitchen Large Electric Appliances - Maytag LAT9416AAE keeps filling
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Maytag LAT9416AAE keeps filling
rich1516
12-16-07, 02:30 PM
This Maytag washer model LAT9416AAE will keep filling at the start of the cycle and will not advance. The unit doesn't overfill it just goes out the drain. Any ideas
daddyjohn
12-16-07, 04:21 PM
hi rich:
has the washer been there for a while or newly installed? The drain standpipe has to be above the tub level otherwise the water will be siphoned out. If that's ok, does the washer fill with water when it's off? If yes, you have a bad inlet water valve. If no, then the problem is most likely the water level control. before condeming a WLC, make sure the hose from the tub to the control is not obstructed.
Maytag help here:
http://www.applianceaid.com/norgewash.html
has the washer been there for a while or newly installed? The drain standpipe has to be above the tub level otherwise the water will be siphoned out. If that's ok, does the washer fill with water when it's off? If yes, you have a bad inlet water valve. If no, then the problem is most likely the water level control. before condeming a WLC, make sure the hose from the tub to the control is not obstructed.
Maytag help here:
http://www.applianceaid.com/norgewash.html