Kitchen Large Electric Appliances - GE profile dishwasher GSD535

I have a GE profile dishwasher ( GSD5350D02CC/ MA730782B) that won't pump all the water out on the last rince cycle. I'd disonnected the hose and capured the water that is pumped out in each cycle. All cycles input about 1 water can full of water (about 1 1/2 gls)and pump it out. On the last rince cycle only half of the water is pumped out.
My profile dishwasher is one that had a recall on it because of the wiring harness location. I think when they installed the new harness one wire was placed on the wrong location.

I am looking for wiring diagram on my model to verify the wiring. GE site does not make them available.

Does any one know their I can get a copy of the wiring diagrams.


Please help

If it is draining some of the water out, it is unlikely that they messed up the wiring. It is more likely there is a restriction somewhere in the dishwasher or drain hose. What does your dishwasher drain into (disposer, standpipe)?

There should be a wiring diagram located somewhere on your dishwasher. Various manufacturers place them in different locations. I have seen some GE's diagrams located on the back or side of the dishwasher meaning you need to uninstall the dishwasher to get to them. Why manufacturers thought this was a good idea, I will never know:wall:

The GE dishwasher drains into the disposal that is why I disconnected it and drained it into a water can. I wanted to see if there was an obstruction but since the wash cycle and the first 2 rince cycles worked I felt there is no problem with the pump. the pump is not runnung long enough in the third rince cycle.

I will have to check if there is a diagram on the side or back of the machine.

Thanks for the info If you have any more please advise

Here's some help for GE DW's including drain problems specific to GE.

http://www.applianceaid.com/ge-dish.html