Electronic Alarms and Home Security Devices - dsc832 trouble

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : dsc832 trouble

cmarin21
11-28-07, 08:37 PM
Good day everyone,

I have a dsc832 that is calling the station with a panic button when I arm it. any ideas?


Thanks,

Integrator97
11-28-07, 09:19 PM
Sounds like it's misprogrammed either at the panel or at the central station. Could be you are using the duress code, or that your code is programmed in the duress slot.

Or it could be it's just sending a closing/arming report, and if you're using 4/2 reporting format, it's sending the wrong code (misprogrammed), or the CS is interpreting it wrong (misinformation or data entry error).

But I'd bet on the first item.