Designing Kitchens and Bathrooms - Microwave installation

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Microwave installation

homerlp
11-02-07, 11:56 AM
I'm going to be installing an under-cabinet microwave. The wall construction is concrete block with ceramic tile on top. Can you make a recommendation for the best type fastener to use to attach the mounting plate to the wall?

Thanks.

Tilebri
11-02-07, 12:39 PM
two holes, one at least as wide as the screw through the tile and then a pilot hole into the block with tapcon screws.
homerlp
11-02-07, 12:54 PM
Thanks. Those are those blue or green screws right?

Tilebri
11-02-07, 02:01 PM
They are blue, but not to be confused with the blue cement board screws or the green backer screws. You can get a small pack with the masonry bit but you will need something for the tile. A piece of duct tape over the spot help to prevent the bit from walking across the tile.

Good Luck.