Kitchen Large Electric Appliances - How to change a Kenmore lid switch

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
zetabear
10-20-07, 01:03 PM
I know the lid switch is broken on model number 11022894100
How can I replace this part?
Thanks
A

even_
10-20-07, 04:55 PM
I cant look up that model # to see, but i changed one recently that the front panel tilted backwards to access the switch. If yours is like that there were two spring loaded clips that had to be pressed together to get the control panel to tilt back out of the way. You could get to the clips by reaching between the top of the washer and the tub.

Might help
Rick
daddyjohn
10-20-07, 05:50 PM
I cant look up that model # to see, but i changed one recently that the front panel tilted backwards to access the switch. If yours is like that there were two spring loaded clips that had to be pressed together to get the control panel to tilt back out of the way. You could get to the clips by reaching between the top of the washer and the tub.

Might help
Rick

www.applianceaid.com has a tutorial