Toilets, Sinks, Showers, Tubs and Disposals - Problem with replacement valve/stem in shower faucet

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
b00st3d
09-12-07, 06:42 PM
I have a rubinet shower faucet that i replaced the valve in...the problem I am having is that the replacement valve cannot support the weight of the handle! basically the handle turns the water on by itself now! any suggestions?!

thanks.

ecman51`
09-13-07, 05:52 PM
In such cases you need good water pressure - and you can't use plumber's grease, Vaseline, etc. in the assembly. If you have, you have to degrease it and fit it back in dry.
b00st3d
09-13-07, 06:49 PM
well, i didnt use any grease, and i didnt try it with water pressure, because the cold side with no water pressure as well stays still! just this new replacement valve turns by itself.