Electronic Alarms and Home Security Devices - Brinks BHS-2000
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Brinks BHS-2000
kadet_flyer
08-28-07, 03:54 PM
I am trying to install a new Brinks keypad on my system and receive the error code "CF" even though the keypad has never been used. Do the keypads have to be "Programmed" before being added to the system?
HotinOKC
08-28-07, 04:20 PM
Brinks systems are very proprietary so I don't have much info to give you just that most keypads you have to set the "address" of the keypad, which requires getting into programming.
CF does mean "component failure".
Did the old one work ok?
You might want to hold on until a pro stops in, but you might have to call Brinks and see if they will even help you.
CF does mean "component failure".
Did the old one work ok?
You might want to hold on until a pro stops in, but you might have to call Brinks and see if they will even help you.
MrRonFL
08-28-07, 07:46 PM
Yes, Brinks keypads have to be addressed into the system. It's _very_ propriatory. You need their programmer and manuals, which are hard to come by.
My general rule with Brinks hardware: Either accept that you have to use their service, or replace the keypads and control with an open system.
My general rule with Brinks hardware: Either accept that you have to use their service, or replace the keypads and control with an open system.