Outdoor Power Equipment and Small Engines - Weedeater Two Cycle Edger

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Weedeater Two Cycle Edger

jsouth
07-31-07, 08:48 PM
I took the carb. off to clean it and took the H and L mixture screws out and laid them in a try to be clean,not looking at them because I do know the difference in the two,after cleaning them I started to rebuild the carb. and notice that there was no difference in the size of the screws,or the holes in the carb. is it possible that this carb. could have the same H and L mixture screws, it's a Walbro WT630,I did look at them with a magnifying glass,and there was no difference,even had my wife look at them too could not tell the difference.

Thanks,
Jerry

30yearTech
08-01-07, 08:14 PM
After looking at the illustrated parts list for your carburetor, I think that the two adjustment screws are the same. The parts breakdown shows it available as a kit with the needles and limiter caps.
jsouth
08-02-07, 06:32 AM
Thanks, 30yeartech,did you find the parts list at walbro and click on aftermarket.

Jerry

30yearTech
08-02-07, 07:54 AM
Yes, thats where I looked it up.